Specifications

Products

 

Description Notes
Shimadzu LC Driver Ver. 3.01 for Empower Software (for single system) For Empower Personal and Enterprise versions.
Shimadzu LC Driver Ver. 3.01 for Empower Software (for 4 systems) For Empower Personal and Enterprise versions.

 

Supported devices

 

Device type Description
System controller CBM-20A / CBM-20A lite
Pump LC-20AD / LC-20AT / LC-20AB / LC-20ADXR
Auto Sampler SIL-20A / SIL-20AC / SIL-20AHT / SIL-20ACHT / SIL-20AXR / SIL-20ACXR / Rack Changer / Rack Changer C / Rack ChangerII
Column Oven CTO-20A / CTO-20AC / CTO-10ASvp / CTO-30A
Detector SPD-20A / SPD-20AV / RF-10AXL / SPD-M20A / PC-55N (AD board)
Option box Option Box vp / SubController vp
Solenoid valves FCV-10AL / FCV-10ALvp / FCV-11AL / FCV-11ALS / FCV-15AL / Low Pressure 4 port valve built in to LC-20AD / LC-20AT / LC-30AD
Rotary valves FCV-12AH / FCV-13AL / FCV-14AH FCV-12AH / FCV-14H built in to CTO-20A / CTO-20AC
Integrated LC LC-2010A / LC-2010C / LC-2010AHT / LC-2010CHT
 
* 4 systems maximum with no PDA or 3 systems with single PDA or
2 systems with 2 PDA (per LAC/E).
* CBM-20A lite will not support analogue data acquisition.
Please use CBM-20A with a PC-55N AD board if analogue signal is acquired.

 

Configuration examples

 

Empower Personal (Stand-alone type)

 

Empower Personal is a stand-alone type configuration. A PC includes a database and data acquisition functions. A single PC is connected directly to LC system(s), and a maximum of 4 LC systems can be controlled.
 

 

Empower Enterprise (Network type)

 

Empower Enterprise is a client-server (C/S) system, which allows any client PC on the network to control any HPLC. HPLC control and data acquisition are done through an acquisition server called LAC/E32, and the acquired data are stored in the database server. Analysis instructions and LC instrument status monitoring are performed from a client PC. Each Shimadzu LC system is controlled by TCP/IP protocol from a PC. If any problem occurs in a LC system on the network, other LC systems in operation are not affected.
 
 
*EmpowerTM and Empower3 are trademarks of Waters corporation

 

This page may contain references to products that are not available in your country.
Please contact us to check the availability of these products in your country.

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.