Product

Laboratory Instruments

TOC 4110 Features

TOC Analyzers

TOC 4110 Features

Features

  • Automatic dilution expands the analysis range and allows the reduction in salt, acid and alkali concentrations to help reduce maintenance and extend catalyst life
  • A complete line of options designated to accommodate samples with suspended particles, slime or seaweed reduces the occurrence of trouble and remedial maintenance in on-line TOC measurement.
  • Optional multi-stream selectors allow analysis of 2 streams, or up to 6 different streams, of varying carbon concentrations.
  • Measurement condition and measurement interval of each sample stream individual programmable
  • User defined calibration check or re-calibration. Automatic calibration is incorporated using standard solutions stored on-board.
  • On-board carrier/combustion gas purification allows use of air supplied from a compressor, thus eliminating expensive and potentially dangerous cylinder gases.

Applications

  • Process management for waste stream influent and effluent at treatment facilities.
  • Operation management of all types of plant waters (i.e.: cooling water, recirculating water, boiler water, wash/rinse water, condenser water)
  • Continuous monitoring of drinking/ process water, and natural water (rivers, lakes, etc.)
  • Continuous monitoring or organic contamination in water streams that must be reported to regulatory agencies.

Backwash Strainer Sample Pretreatment Unit
  • Simple and effective sampling unit for one, homogenous and low contaminated sample stream

  • Sample passes through the strainer into a sampler to supply to the analyzer

  • After sampling, air pushes the sample out of the sampler to prevent adhesion of contaminants and acts to back wash the strainer to prevent the strainer from clogging
Single Stream Suspended Solids Pretreatment Unit
  • Perfectly designed for analysis of one sample stream with suspended particles
  • For Sampling the sample passes through the strainer into a sampler, where the sample will be homogenized. After homogenizing the sample is passed to the analyzer
  • After the sampling, the sampler will be completely rinsed with rinsing water to prevent contaminants, slime and algae problems
Multi-Stream Suspended Solids Pretreatment Unit
  • Sampling works similar as above described
  • Up to 6 sample stream switching is possible
  • Different types of measurement and different full scale ranges can be set for each sample stream
  • A wide range of sample concentrations may be measured on the multiple streams because of the unique rinsing system